3 Watt Signal Boosters receive cell phone signal 50 miles from the closest tower.
The Wilson Dual band cellular signal booster amplifies cellular signal for the best cell phone reception up to fifty miles from the closest cellular tower. The Alltel
cellular signal booster for the best cell phone reception, the Cellular one cellular signal booster for the best cell phone reception, and the Cingular cellular signal
booster for the best cell phone reception amplify signal to enable reception in extended geographical areas. These signal boosters add up to fifty miles of extended
coverage as do the Sprint cellular signal booster for the best cell phone reception, the T-Mobile cellular signal booster for the best cell phone reception, and the
Verizon cellular signal booster for the best cell phone reception. The Iden cellular signal booster for the best cell phone reception is designed specifically to
enhance Nextel cellular signal for the best cell phone reception. The Wireless vehicle cellular signal booster repeater system for the best cell phone reception
offers tremendous signal enhancement without being physically connected to the phone. The . Wireless in-building cellular signal booster repeater system for the
best cell phone reception repeats cellular signal throughout a building enabling multiple users at once.
In-Building Systems
repeat cell phone signal throughout buildings enabling multiple users at one time.
The Iden in-building cell phone signal repeater system for cellular phone reception enables use of multiple phones on the nextel network with full signal within a
building. The Cellular PCS in-building cell phone signal repeater system for cellular phone reception enables use of multiple phones on the cellular frequencies.
This system is applicable as an Alltel in-building cell phone signal repeater system for cellular phone reception, a Cingular in-building cell phone signal repeater
system for cellular phone reception, a Cellular one in-building cell phone signal repeater system for cellular phone reception, and a Sprint in-building cell phone
signal repeater system for cellular phone reception. The T-Mobile in-building cell phone signal repeater system for cellular phone reception and the Verizon
in-building cell phone signal repeater system for cellular phone reception also provide complete coverage within a building using these cellular frequencies.
The Wilson Dual band cellular signal booster amplifies cellular signal for the best cell phone reception up to fifty miles from the closest cellular tower. The Alltel
cellular signal booster for the best cell phone reception, the Cellular one cellular signal booster for the best cell phone reception, and the Cingular cellular signal
booster for the best cell phone reception amplify signal to enable reception in extended geographical areas. These signal boosters add up to fifty miles of extended
coverage as do the Sprint cellular signal booster for the best cell phone reception, the T-Mobile cellular signal booster for the best cell phone reception, and the
Verizon cellular signal booster for the best cell phone reception. The Iden cellular signal booster for the best cell phone reception is designed specifically to
enhance Nextel cellular signal for the best cell phone reception. The Wireless vehicle cellular signal booster repeater system for the best cell phone reception
offers tremendous signal enhancement without being physically connected to the phone. The . Wireless in-building cellular signal booster repeater system for the
best cell phone reception repeats cellular signal throughout a building enabling multiple users at once.
In-Building Systems
repeat cell phone signal throughout buildings enabling multiple users at one time.
The Iden in-building cell phone signal repeater system for cellular phone reception enables use of multiple phones on the nextel network with full signal within a
building. The Cellular PCS in-building cell phone signal repeater system for cellular phone reception enables use of multiple phones on the cellular frequencies.
This system is applicable as an Alltel in-building cell phone signal repeater system for cellular phone reception, a Cingular in-building cell phone signal repeater
system for cellular phone reception, a Cellular one in-building cell phone signal repeater system for cellular phone reception, and a Sprint in-building cell phone
signal repeater system for cellular phone reception. The T-Mobile in-building cell phone signal repeater system for cellular phone reception and the Verizon
in-building cell phone signal repeater system for cellular phone reception also provide complete coverage within a building using these cellular frequencies.
| 1900MHz WIRELESS IN-BUILDING AMPLIFIER/REPEATER SYSTEM |
| THE FOLLOWING APPLICATIONS ARE DESIGNED FOR A RESIDENCE, OFFICE, OR SMALL TO MEDIUM SIZED COMMERCIAL BUILDING. OUR ENGINEERING TEAM CAN DESIGN SYSTEMS FOR BUILDINGS OF ALL SIZES, AND CAN PROVIDE COVERAGE FOR MULTIPLE CARRIERS. For buildings over 5,000 square feet or for multi-carrier solutions please call a Customer Service Representative at 1-877-233-6673 |
| 1900 MHz WIRELESS SIGNAL BOOSTER / AMPLIFIER REPEATER OPERATION The CSI-BDA150-PF PCS FULL BAND In-Building Amplifier/Repeater, featuring 50 dB of gain, is the perfect solution for small office/home installations. This easy to install BDA was designed for placement on a desk or counter top but can also be wall mounted if preferred. The Model 150 provides, as standard, the following integrated features: The Model 150 continuously monitors its operation for instability and responds by reducing the gain of the amplifier to eliminate an unstable condition. Automatic Gain Control (AGC) lowers the amplifier gain in order to reduce strong signals. The overload shutdown with automatic recovery feature detects very strong signals that cannot be adequately controlled by the AGC. The amplifier will disable itself and then attempt to recover. The amplifier is active for a very brief period of time (less than 30 milliseconds) until the overload condition is eliminated. Higher power output than any other amplifiers in its class with approximately 100 milliwatts (+20 dBm) in the uplink and downlink for all models. |
Amplifier Part Numbers
Frequency
Gain (up/down)
Linear Output Power
Propagation Delay
Noise Figure (down)
Power Requirements
Connectors
Dimensions
Indicator LEDs
Frequency
Gain (up/down)
Linear Output Power
Propagation Delay
Noise Figure (down)
Power Requirements
Connectors
Dimensions
Indicator LEDs
492725 (50dB)
1850-1910 Uplink 1930-1990 Downlink
50 dB / 50 dB
+19 dBm
<150 nsec
4 dB nominal
+5 Vdc, 1.2A
N-Female
6.24" x 3.05" x 1.13" / 2lbs
Power, AGC, Isolation, Shutdown
1850-1910 Uplink 1930-1990 Downlink
50 dB / 50 dB
+19 dBm
<150 nsec
4 dB nominal
+5 Vdc, 1.2A
N-Female
6.24" x 3.05" x 1.13" / 2lbs
Power, AGC, Isolation, Shutdown
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WIRELESS SIGNAL BOOSTER / AMPLIFIER with Smart Technology REPEATER OPERATION The Wilson 1900MHz Wireless Signal Booster - Amplifier / Repeater greatly improves signal strength inside a building when using your cellular phone. It does this with no physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna providing the best cellular reception. When the phone transmits it is received by the inside antenna. It is then amplified / repeated to the cell site through the outside antenna. AMPLIFIER FEATURES Maximum 3 Watts Output Power High Power Output Allows More Users On the System Low Cost Solution with Uncompromised Performance Automatic Gain Control to prevent oscillation or overload Automatic Shutdown on overload LED Indicators: Power, Oscillation, AGC FCC Approved AMPLIFIER SPECIFICATIONS |
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
| QUESTIONS OR COMMENTS CAN BE E-MAILED TO SUPPORT@MYCELLULARSOLUTIONS.COM |
| 2004-2008 Cellular Solutions Signal Enhancing Specialists, LLC |
| Copyright |
| AMPLIFIER SPECIFICATIONS |
| Recommended for small commercial buildings and residential applications BDA to feature: Isolation Control Automatic Gain Control (AGC) Overload Shutdown |
| 50 dB GAIN / 1900 MHz AMPLIFIER |
Amplifier Part Number
Frequency
Gain
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
801306
1850-1910 Uplink 1930-1990 Downlink
60 dB max
3 Watts
+ 25 dBm uplink / +25 dBm downlink
4 dB nominal
± 4 dB
> 90 dB
120 V AC / 3 A max
N-Female 50 Ohms
4.5 x 3.5 x 1.25(inches) 11.43 x 8.9 x 3.2 (cm)
1.5 lbs or 0.7 kg
1850-1910 Uplink 1930-1990 Downlink
60 dB max
3 Watts
+ 25 dBm uplink / +25 dBm downlink
4 dB nominal
± 4 dB
> 90 dB
120 V AC / 3 A max
N-Female 50 Ohms
4.5 x 3.5 x 1.25(inches) 11.43 x 8.9 x 3.2 (cm)
1.5 lbs or 0.7 kg
| PRODUCT #801306 IN STOCK NOW |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Easy Online Ordering |
| Call a Customer Service Representative toll free at 1-877-233-6673 |
| 1-877-233-6673 |
| 1900 MHz WIRELESS SIGNAL BOOSTER / AMPLIFIER REPEATER OPERATION The CM-1900 FULL BAND In-Building Amplifier/Repeater, featuring 65 dB of gain, is the perfect solution for small office/home installations. This easy to install BDA was designed for placement on a desk or counter top but can also be wall mounted if preferred. |
Amplifier Part Number
Frequency
Gain (up/down)
Maximum Output Power
Power Requirements
Connectors
Dimensions
Frequency
Gain (up/down)
Maximum Output Power
Power Requirements
Connectors
Dimensions
CM 1900
1850-1910 Uplink 1930-1990 Downlink
65 dB / 65 dB
3 Watts
+5 Vdc, 1.2A
N-Female
6.33" x 3.82" x 2.11" / 2lbs
1850-1910 Uplink 1930-1990 Downlink
65 dB / 65 dB
3 Watts
+5 Vdc, 1.2A
N-Female
6.33" x 3.82" x 2.11" / 2lbs
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| AMPLIFIER SPECIFICATIONS |
| Recommended for small commercial buildings and residential applications. Provides almost double the coverage area of a 60dB amplifier. |
| 65dB dB GAIN / 1900 MHz AMPLIFIER |
| Large Facilities Click Here Buildings over 50,000 square feet |
