| 800MHz CHANNEL A WIRELESS IN-BUILDING REPEATER SYSTEM |
| THE FOLLOWING APPLICATIONS ARE DESIGNED FOR A RESIDENCE, OFFICE, OR SMALL TO MEDIUM SIZED COMMERCIAL BUILDING. OUR ENGINEERING TEAM CAN DESIGN SYSTEMS FOR BUILDINGS OF ALL SIZES, AND CAN PROVIDE COVERAGE FOR MULTIPLE CARRIERS. For buildings over 5,000 square feet or for multi-carrier solutions please call a Customer Service Representative at 1-877-233-6673 |
| WIRELESS SIGNAL BOOSTER / AMPLIFIER with Smart Technology REPEATER OPERATION The 800MHz Channel A Wireless Signal Booster - Amplifier / Repeater greatly improves signal strength inside a building when using your cellular phone. It does this with no physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna providing the best cellular reception. When the phone transmits it is received by the inside antenna. It is then amplified / repeated to the cell site through the outside antenna. AMPLIFIER FEATURES Maximum 3 Watts Output Power High Power Output Allows More Users On the System Low Cost Solution with Uncompromised Performance Automatic Gain Control to prevent oscillation or overload Automatic Shutdown on overload LED Indicators: Power, Oscillation, AGC FCC Approved AMPLIFIER SPECIFICATIONS |
| COMPONENTS INCLUDED IN A WIRELESS IN-BUILDING SYSTEM: |
| ||||||||||||||||||||||||||||||||
| IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE CALL A SALES SUPPORT REPRESENTATIVE FOR ASSISTANCE |
Amplifier Part Numbers
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
Frequency
Gain (up/down)
Max Output Power
Max RF (up/down)
Noise Figure (down)
Flatness (up/down)
Isolation
Power Requirements
Connectors
Dimensions
Weight
801108 (60dB)
824-835 Uplink 869-880 Downlink
60 dB / 60 dB
3 Watts
+30 dBm / +30dBm
3 dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC, 3 A max
N-Female 50 Ohms
5.6 x 3.6 x 1.7(inch)
1.5 lbs
824-835 Uplink 869-880 Downlink
60 dB / 60 dB
3 Watts
+30 dBm / +30dBm
3 dB nominal
+/- 2.5dB / +/-2.5dB
Uplink/Downlink more than 90dB
120 V AC, 3 A max
N-Female 50 Ohms
5.6 x 3.6 x 1.7(inch)
1.5 lbs
| PRODUCT #801108 IN STOCK NOW |
| Easy Online Ordering |
| Call a Customer Service Representative toll free at 1-877-233-6673 |
This amplifier is only to be used in a solution where isolating the 800MHz frequency is required
in order to avoid interference with a Nextel iDen frequency within the same building.
in order to avoid interference with a Nextel iDen frequency within the same building.
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
_______________________________________________________________________________________________________
| Customer Service & Sales Support support@mycellularsolutions.com 1-877-233-6673 |
CopyRight: 2009 Cellular Solutions - Signal Enhancing Specialists
| Questions? Please Call 1-877-233-6673 |